[Kevan]

I can assure you it is, it says inside.  That bodyshell had many hours of surface prep, filler, sanding, primer, more sanding, more filler...

It's nice isn't it 

[woodcote]

Some great-looking cars there, although - obviously - all eyes will be on the two Reprotec Abarths 

Mine is more stock than Jeremy's. I've kept everything apart from the rear wheels and the wiring. Jeremy has replaced the rear axle, crown gear and guide. In testing on Ninco tarmac, the blue Abarth was quicker over a lap, but both cars set very similar times over 10 laps. Mine was certainly noisier. Unless someone was sandbagging, it could be close.

[Kevan]

Some great-looking cars there, although - obviously - all eyes will be on the two Reprotec Abarths 

...no pressure then 

[BAracer]

Some great-looking cars there, although - obviously - all eyes will be on the two Reprotec Abarths 

...no pressure then 

I would describe them a surprisingly well balanced...whether they remain that way at high speed is the question!

[Graham]

Some great-looking cars there, although - obviously - all eyes will be on the two Reprotec Abarths 

...no pressure then 

I would describe them a surprisingly well balanced...whether they remain that way at high speed is the question!

They can do “high speed” then, looking forward to that

[Graham]

RUSCILLO RACING
One last entry.
A little late due to unforseen personal circumstances, but I was able to collect them yesterday from my Club mate.

   

Event 2 (Super & Modern)
Honda Civic
Body Scalextric
Chassis Scalextric 3d printed 
Motor NSR Shark 20k
Rear Tyres Thunderslot

Event 3 ( Larger Saloons)
Mercedes C Class
Body Slot it
Chassis Slot it in line
Motor slot it 21k
Rear tyres BRM

[BAracer]

Some full size examples from Goodwood yesterday...