8th-Jan-25, 07:09 PM
Hi Zipp,
I think 22mm is very borderline for the ARC PRO unless you add a ‘tail’ to the guide blade or do the digital only ‘grey wire mod’.
If you are repositioning things, for the slot.it GT40 it’s probably best to add a 3mm LED on a flying lead from the decoder and drill a hole in the chassis, ideally, 10mm back from the tail edge of the guide blade. Check first that this position doesn’t foul on the front axle.
c
I think 22mm is very borderline for the ARC PRO unless you add a ‘tail’ to the guide blade or do the digital only ‘grey wire mod’.
If you are repositioning things, for the slot.it GT40 it’s probably best to add a 3mm LED on a flying lead from the decoder and drill a hole in the chassis, ideally, 10mm back from the tail edge of the guide blade. Check first that this position doesn’t foul on the front axle.
c
![[+]](https://slotracer.online/community/images/bootbb/collapse_collapsed.png)