Cars bought by members in 2021 - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Slot Cars (https://slotracer.online/community/forumdisplay.php?fid=3)
+--- Forum: 1:32 Scale (https://slotracer.online/community/forumdisplay.php?fid=4)
+--- Thread: Cars bought by members in 2021 (/showthread.php?tid=1785)

---

RE: Cars bought by members in 2021 - BAracer - 10th-Apr-21

(8th-Apr-21, 09:50 PM)BARacer Wrote:  Let's go OFF ROAD!



Roll on October...

I'm struggling to release the car from the base! There is a diagram that suggests it's a left hand thread fixing screw, but it's very tight in both directions!

Any tips?

---

RE: Cars bought by members in 2021 - Top Down - 10th-Apr-21

Ha! Glad I'm not the only one!

I had exactly the same problem.

After multiple frustrating attempts to detach mine in the suggested way I  ended up sawing through the blessed hold-down pin!'

Having done so I found it 'should' only need a quarter turn then pull out - but would it? No!

---

RE: Cars bought by members in 2021 - OXO cube - 10th-Apr-21

(10th-Apr-21, 06:59 PM)BARacer Wrote:  

(8th-Apr-21, 09:50 PM)BARacer Wrote:  Let's go OFF ROAD!



Roll on October...

its not a screw 
its a little lug 
turn it through 90 degrees ( either way ) and i will come outa the slot 
I'm struggling to release the car from the base! There is a diagram that suggests it's a left hand thread fixing screw, but it's very tight in both directions!

Any tips?

---

RE: Cars bought by members in 2021 - OXO cube - 10th-Apr-21

wow that didnt work right 
but you get the gist

---

RE: Cars bought by members in 2021 - Marcury - 11th-Apr-21

(10th-Apr-21, 07:44 PM)OXO cube Wrote:  

(10th-Apr-21, 06:59 PM)BARacer Wrote:  

(8th-Apr-21, 09:50 PM)BARacer Wrote:  Let's go OFF ROAD!



Roll on October...

its not a screw 
its a little lug 
turn it through 90 degrees ( either way ) and i will come outa the slot 
I'm struggling to release the car from the base! There is a diagram that suggests it's a left hand thread fixing screw, but it's very tight in both directions!

Any tips?

That's it. Use a coin to turn it 90°, then the pin will go down and you will have to pull out the car because it is still remaining fixed to the box.

---

RE: Cars bought by members in 2021 - BAracer - 11th-Apr-21

I tried using more effort than I was comfortable with for a plastic toy. 

Think it will be the hacksaw blade solution.

---

RE: Cars bought by members in 2021 - OXO cube - 11th-Apr-21

hehehehe 
this is usually my solution 
a succession of increasingly larger hammers 
always works for me ! 

---

RE: Cars bought by members in 2021 - Marcury - 12th-Apr-21

My 2021 new cars :

TTS 1/24 Autobianchi A112 Abarth


Mitoos 1/32 VW Touareg


Slot.it 1/32 Mercedes 190E DTM

---

RE: Cars bought by members in 2021 - Mazda - 14th-Apr-21

[attachment=14006]
I’m getting worried now, since the proxy Rally Sprint event. These rally cars seem to be getting addictive.

---

RE: Cars bought by members in 2021 - steveaca - 15th-Apr-21

Very nice. Bodyshell looks a lot like the Fly 911 though.

---