Racing the 60's Slot Car Proxy -REGISTRATION - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Racing (https://slotracer.online/community/forumdisplay.php?fid=27)
+--- Forum: Proxy Racing (https://slotracer.online/community/forumdisplay.php?fid=42)
+--- Thread: Racing the 60's Slot Car Proxy -REGISTRATION (/showthread.php?tid=5319)

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Graham - 11th-Sep-26

(11th-Sep-26, 12:27 PM)Graham Wrote:  I am shortly embarking on my vacation, on the issue of the inclusion of Front engined F1/indy cars of the early 60's, so far has not been a "veto" from any of the Registered Entrants.

So my further thoughts on this is that although these Front engined cars only ran in the earliest years (until 1962 ?) they can be included but they should have the dimentional aspects with that of the Front engined cars.
So if the proposal is adopted the following restrictions would specifically apply to these models: Max Tyre width 8mm, Axle/Tyre Max width (track) 53mm, Track clearance min 2mm, rear wheel/tyre diameter 21mm. Additionally only cars fitted with a Slimline motor would be permitted (Cartrix models with S-Can Motors would not be permitted)
There is a limited list of Front engine GP cars which were racing in the 60's.
As far as I am aware:
Ferrari Dino 246
Maserati 250F
Scarab
Aston Martin DBR5
BRM P45 & P25
Lotus 16 - Climax
Vanwall
Fergusson P99-Climax
Watson Roadster

So only these GP models would be permitted

The proposal has been rejected

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Kevan - 11th-Sep-26

By who?

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Kevan - 12th-Sep-26

Ignore that question, I've seen the post on HRW 

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Graham - 29th-Sep-26

I received a message today from a potential new entrant who raised one or two issues which I felt was necessary to clarify within the rules. I have done this with the following clarifications made:

G1) Mass produced RTR except those listed (G3) eg Scalextric, Carrera, SCX, Fly, Revell-Monogram, MRRC, Ninco, MRSlotcar etc. Free choice of motor mounts, axles, wheels, guides and gears etc.
G3) Slot it, Policar, NSR, Thunderslot, Scaleauto bodies and chassis are NOT permitted. Motor Mounts/pods or other mechanical parts are permitted.

C1) Chassis types:
Standard/ Modified – RTR permitted ( except Slot it/Policar, NSR, Thunderslot or Scaleauto), modified RTR chassis (except those listed above), any branded universal, 3d printed, MRSlotcar, Resin cast, Plasticard fabricated or Penelope Pitlane folded Etched Nickel.

And I had mispelt MRSlotcar which I have corrected

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Graham - 30th-Sep-26

Entry Car Entry Registration Update

[attachment=48661]

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Brumos RSR - 30th-Sep-26

#3 250SWB Ferrari will be my final entry for the hardtop class

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Kevan - 1st-Oct-26

It's exciting to see a lot of new names appearing on the entrants list, I'm really looking forward to seeing the cars that appear 

---

RE: Racing the 60's Slot Car Proxy -REGISTRATION - Graham - 3rd-Oct-26

Many thanks to Demon Tweeks, I have received your 2 car Registrations.

---